Removing a flow restrictor from a showerhead might be difficult for the majority population. The reason is straightforward. Because they have never performed it nor learned it from an experienced one. Yet, when you become busy earning and have no budget to hire someone, that time arrives to learn it with the flow. If you are also the part of this community who does not know how to remove flow restrictor from the showerhead, we will teach from the very beginning. Don’t you lose hope! As we are always here to help you in the hour of need. Therefore, don’t break the flow of reading.
Planning to upgrade your shower head read our complete buying guide of Best Massaging Showerhead
Now, let us discuss some crucial steps to remove the flow restrictor from the showerhead.
1. Turning showerhead from the arm
First and foremost, place all the effective tools on your side. You will be required to have a wrench, a piece of cloth, and a plier for the removal of the showerhead. Because of the flow restrictor, the shower will be tight enough to turn it off from its original position. Only using your hands will not be helpful in this entire process. First, unscrew the nuts around the showerhead in an anti-clockwise direction. For most of you, showerhead will take around forty minutes to come out. Therefore, don’t worry while performing the task.
2. Unplug the screening
Many latest showerheads have a screen in the internal core of their structure. Sometimes, it acts as a restrictor for the water flow to rush from the shower. That is why you have faced the problem of water restriction from the showerhead. Naturally, take the showerhead and remove the outer covering of the shower. From that point, a shiny surface will spark your eyes which is none other than a screen. You can only pull it off with your gentle fingers. Moreover, you can also tap slightly at the back of the showerhead in order to remove the screen.
3. Remove the O-ring
Now, it is the right time to hold a metal pin to know the exact position of the O-ring. Once you figure out its position, carefully check whether the gasket is bending or non-bending. Mostly, you will observe its position as a non-bending state. Have a paperclip in your right hand and carefully change the position of your ring. If you carelessly damage the ring, there is a guarantee that your showerhead will become of no use. Unluckily, it will not correctly re-fit in the arm. Hence, unbending is the only way to eradicate the restriction.
4. Bring out the flow restrictor
Finally, you have reached the unalterable part of the head, which is the flow restrictor. You will observe it in a star-shaped resistor just present beneath the plastic ring. For the second time, hold a paperclip in an unbending position, adjust it in a single part of the restrict. Twist it tightly like an iron to extract the flow restrict from the showerhead. If you do not flow the steps with concentration, there is a chance of getting fail in the entire process. You will only waste your time while skipping any one of the steps. Here is a quick tip for you all; try to use a screwdriver to bring the flow restrictor from its position. This tool will save you precious time too.
5. Reattachment time
After removing the O-ring and the screen, now you are free to attach the showerhead with its arm. But, before doing it, install the new screen and the O-ring inside the showerhead before its attachment. Otherwise, the water flow will not stop from the showerhead. O-ring and screen are freely available in a local market. You can surely buy it at a reasonable price. Sometimes, it is not enough for the individual to simply attach it to screw nuts around the showerhead. For that purpose, you can use a plumber’s tape to thread the showerhead with the arm.
Finally, we are done with today’s article. We have taught you from a beginner level negotiating how to remove flow restrictor from the showerhead. Now, you have to perform while updating us on your experience.